Features

Design benefits

waterproof

At 10,000 Schmerbers, the jacket is properly waterproof.

breathability

This jacket is breathable, with a RET below 6.

ventilation

Opening at the back to allow air to circulate without sacrificing the waterproof quality.

pockets

Keep the essentials within reach thanks to the two side stomach pockets.

Design details

RUN IN THE RAIN WITHOUT GETTING SOAKED!

Our jacket is equipped with a 2-layer membrane. The film applied to the inside of the fabric stops water coming from outside, but also wicks away perspiration. This ultra-technical component has a waterproof factor of 10,000 Schmerbers and can thus withstand the pressure exerted by 10,000 mm of water.

A BREATHABLE PRODUCT FOR EVEN MORE COMFORT

The breathability of a product is measured by its Thermal Evaporative Resistance (TER). The lower the resistance (and therefore the coefficient), the more breathable the fabric. Our waterproof jacket also has a breathability index that's lower than 6, so we can affirm it's definitely breathable... And that's just as well, because:why protect yourself from the water outside the jacket only to sweat more inside?

DISCRETE AND EFFECTIVE VENTILATION POINTS

To allow air to circulate freely, we've equipped this jacket with vents at the upper part of the back.

ADJUSTABLE HOOD

The adjustable hood makes it adapt to your body beautifully so that it follows your head movements.

STAY DRY THROUGH THE 3-LAYER TECHNIQUE

Did you know that the intensity of your activity, the height profile and the weather conditions can influence the choice of your different layers of clothing? This is the right order, which can be adjusted according to the parameters mentioned above: - Layer 1 is breathable and wicks perspiration away to the other layers. - Layer 2 is insulating, protects you from the cold and keeps you warm. - Lastly, layer 3 protects you from the wind and/or rain.

A JACKET THAT IS JUST AS GOOD TO LOOK AT AS TO WEAR

Nathan, our designer, has left nothing to chance: from the design and choice of colour to the accessories and strategically-placed vents, each detail has been carefully designed and perfected! With its subtle and modern lines, and technical and precise finishes, this jacket combines technical quality with simplicity... Perfect for your runs, and much more!

WASHING TIPS FOR YOUR JACKET...

We recommend that you machine wash on a synthetics programme (30°c), thorough rinse and slow spin. Do not use bleach and softener to wash your jacket - gentle detergent is enough. Before washing your jacket, turn it inside out, empty the pockets and close the zips as well as the velcro tabs on the wrists. Lastly, do not overload the machine and fold the garment, or mix colours.

...AND DRY IT!

Dry your jacket in the open air, then 10 to 15 minutes in a tumble dryer, on a synthetics programme. It is vital that you do not overdry the jacket, or put it on a radiator. If, in spite of the washing, thorough rinsing, open-air drying and cool tumble drying, drops of water no longer flow across the surface of your jacket, we recommend that you rewaterproof it using a spray or a technical detergent sold in our stores

frequency	regular
weather conditions	rainy weather
customisation	customizable
waterproof	waterproof
hood	with hood
pocket	zip closed pocket
main material	polyurethane
style	plain
type of length	at the hips
windproof	windproof
fit	straight
sleeves length	long sleeves
breathability (in RET)	RET < 6 : breathable
ventilation system	carrier's back in mesh

WOMEN'S RAIN RUN 100 JACKET - WHITE

Features

Design benefits

Design details

Specifications

Details

Composition

Usage & care

Care instructions

Cleaning

Environmental impact

Ecodesign approach